Quadgrow Auto Fill Float Valve Kit x 2 can be added to your Quadgrow system or to a reservoir tray holding plant pots, automatically maintaining a consistent water level without the need for a power supply.

This versatile float valve is ideal for maintaining water levels within containers and is perfectly suited to the SmartReservoir tanks used in the Quadgrow Pots Watering System, 4 Pot and Quadgrow Pots Watering System, 8 Pots. It can also be used with deep trays, plant reservoirs and pet water troughs.

The float valve automatically replenishes water as levels drop, helping to maintain a steady supply of moisture for plants with minimal effort. Suitable for containers with a minimum depth of 10cm, it can maintain different water levels from 25mm upwards depending on the installation position.

The kit includes two float valves, 1.8 metres of tubing for each valve and a tap connector fitting complete with an integrated filter and barbed pipe reducer.

How to use:

• Push the float valve through a 21mm hole in the chosen vessel or container.
• Position the hole approximately 15mm above the water level you wish to maintain.
• Attach the supplied tubing to the threaded float valve connection.
• Connect the opposite end of the tubing to a suitable hose connector tap fitted to a water butt or storage tank.
• Ensure the water source is positioned at least 20cm higher than the container being filled to provide adequate gravity-fed water pressure.

Quadgrow SmartReservoir tanks already feature the required installation hole. Containers used with this kit should be at least 10cm deep. A suitable click-fit hose connector tap is required on the water source.

This product is intended for gravity-fed watering systems only and is not suitable for mains-pressure or pumped water supplies.